WIRE MESH FILTER

Wire mesh filter has a greater number of finer wires in the shute direction and is woven in both plain and twill weave patters. It is normally rated by the size particle it will retain, either as the absolute micron rating or the nominal micron rating, expressed in microns.

We normally use stainless steel woven mesh 304, 304L, 316, 316L as filter media in the patterns of plain, twilled, dutch weave to achieve full range of aperture and properties.

Characteristic: filter wire cloth has excellent anti-wear property, heat-resistance and acid, corrosion resistance.

Applications: filter wire cloth is utilized as filter fittings for chemical industry, medicine, petroleum, telecommunication, scientific research units etc.

Cylindrical oil filters made of 0.5 mm stainless steel wire mesh:
Roll mesh to create a tube
Overlap at joining edge min 3.0mm
the finished diameter is 21.00 / 20.60 mm
The overall length is 49.50 +0.20 / - 0.10 mm
Silver solder joining edge and both ends.

Wire mesh filter with woven mesh or welded type for separation